See Our Video
Coning and Threading Machine
Video
Coning and Threading Machine
Video
Maximator® ball Check Valves prevent reverse flow where bubble tight shutoff is not mandatory. Check valves are designed to operate to 660ºF. These check valves are not to be used as a relief device. The cracking pressure of the O-ring check valves is approximately 10 psig.
Unit of Measure
Valve Pattern |
N/A Ball |
Connection Type |
N/A 6HF |
Pressure Rating |
N/A Up to 30,000 psi |
Orifice Size |
N/A 0.125 in |
Flow Value (Cv) |
N/A 0.28 |
Dimension A (Hex.) |
N/A 1.19 in |
Dimension B |
N/A 3.81 in |
Operating Temperature |
N/A 660 ºF |
Material |
N/A Annealed 316 Stainless Steel |
Caution |
N/A Frequent inspections of O-Rings are necessary to ensure proper service of the check valve. O-Rings have shown satisfactory service life in testing, however different service conditions may lead to variations in cycle and shelf life. |
Terms and Conditions |
N/A All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. |
Quick Contact:
