Working With You and For You
Maximator® Dual-Disc line Filters are used to filter process fluids in high pressure systems. This design helps remove the large particles first through a coarse primary disc, which then allows a secondary disc to provide a smaller micron filtration.
These filter elements are designed to withstand pressure surges without cracking, flaking, or rupturing. Filter elements come standard in the following micron sizes: 5/8, 8/30, 30/56 (secondary/primary). Filters are rated for temperatures -60ºF to 660ºF. All line filters come with glands and collars.
Unit of Measure

Material

N/A Annealed 316 Stainless Steel

Pressure Rating

N/A 30,000 psi

Orifice Size

N/A 0.187 in

Micron Size

N/A 5/8 µm

Connection Type

N/A 9HF

Filter Element Areas

N/A 0.15 in²

Dimension A

N/A 3.39 in

Dimension B

N/A 5.73 in

Dimension C

N/A 1.44 in

Temperature Range

N/A -60 to 660 ºF

Note

N/A It is recommended that all liquids entering a high pressure system be thoroughly cleaned, Maximator® filters are designed to remove small amounts of process particles. Pressure differential should not exceed 1000 psi across the filter elements.

Terms and Conditions

N/A All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Quick Contact: