Maximator® ball Check Valves prevent reverse flow where bubble tight shutoff is not mandatory. Check valves are designed to operate to 660ºF. These check valves are not to be used as a relief device. The cracking pressure of the O-ring check valves is approximately 10 psig.
Unit of Measure

Valve Pattern

N/A Ball

Connection Type

N/A 4HF

Pressure Rating

N/A Up to 30,000 psi

Orifice Size

N/A 0.094 in

Flow Value (Cv)

N/A 0.15

Dimension A (Hex.)

N/A 1.19 in

Dimension B

N/A 3.40 in

Operating Temperature

N/A 660 ºF

Material

N/A Annealed 316 Stainless Steel

Caution

N/A Frequent inspections of O-Rings are necessary to ensure proper service of the check valve. O-Rings have shown satisfactory service life in testing, however different service conditions may lead to variations in cycle and shelf life.

Terms and Conditions

N/A All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.