Pipe ball check valves prevent reverse flow where bubble tight shutoff is not mandatory. These check valves are designed to operate to 660ºF.
These check valves are not to be used as a relief device. The opening pressure of the pipe ball check valves is approximately 10 psi.
Materials: Body, cover, poppet, cover gland: 316 series stainless steel
Ball: 316 series stainless steel
Spring: 300 series stainless steel
These check valves are not to be used as a relief device. The opening pressure of the pipe ball check valves is approximately 10 psi.
Materials: Body, cover, poppet, cover gland: 316 series stainless steel
Ball: 316 series stainless steel
Spring: 300 series stainless steel
Unit of Measure
Pressure Rating |
N/A 15,200 psi |
Connection Type |
N/A 1 in. NPT |
Orifice Size |
N/A 0.685 in |
Flow Value (Cv) |
N/A 7.40 |
Dimension A |
N/A 7.32 in |
Dimension B |
N/A 5.75 in |
C (Hex) |
N/A 2.00 in |
D (Hex) |
N/A 2.00 in |
Material |
N/A Body, Cover, Poppet, Cover Gland: 316 Series Stainless Steel O-Ring: Fluorocarbon (FKM) "A" (-4ºF to 392ºF) Spring: 300 Series Stainless Steel |
