Two air amplifiers are mounted on a 120 gallon air receiver tank. GPLV2 operates at a 2:1 pressure ratio. Pressure gauges are on the air holding tank and outlet (0-300 psi). An air filter with a shutoff valve is provided for each amplifier.
The 120 gallon pressure accumulator tank is horizontally configured, and is A.S.M.E. rated to 200 psig. The safety relief valve on the tank is set at 200 psig Outlet pressure regulator adjustable 0-200 psig.
All of the components are mounted and plumbed on the horizontal tank, hammer red powder coat finish, and is tested prior to shipment. The system will store air automatically up to 2 times the inlet pressure. The maximum system pressure rating is 200 psig. If your shop air is at 90 psig, the system would charge up to 180 psig and stall. Upon air use the system will automatically start up and recharge the storage tank. Air loading cylinders are powered by systems like these.
Contact MAXPRO® with any questions.
The 120 gallon pressure accumulator tank is horizontally configured, and is A.S.M.E. rated to 200 psig. The safety relief valve on the tank is set at 200 psig Outlet pressure regulator adjustable 0-200 psig.
All of the components are mounted and plumbed on the horizontal tank, hammer red powder coat finish, and is tested prior to shipment. The system will store air automatically up to 2 times the inlet pressure. The maximum system pressure rating is 200 psig. If your shop air is at 90 psig, the system would charge up to 180 psig and stall. Upon air use the system will automatically start up and recharge the storage tank. Air loading cylinders are powered by systems like these.
Contact MAXPRO® with any questions.
Unit of Measure
