Maximator® Dual-Disc line Filters are used to filter process fluids in high pressure systems. This design helps remove the large particles first through a coarse primary disc, which then allows a secondary disc to provide a smaller micron filtration.
These filter elements are designed to withstand pressure surges without cracking, flaking, or rupturing. Filter elements come standard in the following micron sizes: 5/8, 8/30, 30/56 (secondary/primary). Filters are rated for temperatures -60ºF to 660ºF. All line filters come with glands and collars.
These filter elements are designed to withstand pressure surges without cracking, flaking, or rupturing. Filter elements come standard in the following micron sizes: 5/8, 8/30, 30/56 (secondary/primary). Filters are rated for temperatures -60ºF to 660ºF. All line filters come with glands and collars.
Unit of Measure
Material |
N/A Annealed 316 Stainless Steel |
Pressure Rating |
N/A 30,000 psi |
Orifice Size |
N/A 0.125 in |
Micron Size |
N/A 5/8 µm |
Connection Type |
N/A 6HF |
Filter Element Areas |
N/A 0.07 in² |
Dimension A |
N/A 2.99 in |
Dimension B |
N/A 5.18 in |
Dimension C |
N/A 1.19 in |
Temperature Range |
N/A -60 to 660 ºF |
Note |
N/A It is recommended that all liquids entering a high pressure system be thoroughly cleaned, Maximator® filters are designed to remove small amounts of process particles. Pressure differential should not exceed 1000 psi across the filter elements. |
Terms and Conditions |
N/A All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. |
