Exceeds industry standard of 20,000 psi. MAXIMATOR cup-type line filters are used when maximum filtration surface area and a single micron size element is preferred. This design increases the filter area as much as 6 times the area of the disc type filter, and will permit higher flow rates with a lower pressure drop, and longer intervals between element changes. Filter elements come standard in 5, 30, or 56 micron sizes and are easily replaced. Filters are rated for temperatures -60°F to 660°F. All line filters come with glands and collars.
Unit of Measure

Pressure Rating @ RT

N/A 22,500 psi

Orifice

N/A 0.219 in

Micron Size

N/A 5

Connection Type

N/A 6MF

Filter Element Areas

N/A 0.82 in²

Dimension A

N/A 2.83 in

Dimension B

N/A 3.35 in

Dimension C (Hex.)

N/A 1.06 in

Material

N/A Body, cover, cover gland: 316 series stainless steel Element: 300 series stainless steel

Note

N/A
  • It is recommended that all fluids entering a high pressure system be thoroughly cleaned.
  • Maximator filters are designed to remove small amounts of process particles.
  • Pressure differential should not exceed 1000 psi across the filter elements.

Terms and Conditions

N/A
  • All dimensions are for reference only and subject to change.
  • All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Quick Contact:
© 2018 MaxPro Technologies Inc, All Rights Reserved Site created by Thomas Web Solutions and powered by Navigator Platform