Maximator® Pipe line filters are used to filter process fluids in high pressure systems. The cup type design is used when maximum filtration surface area and a single micron size element is preferred. These high pressure NPT fittings are rated to 15,200 psi.
This design increases the filter area as much as 6 times the area of the disc type filter, and will permit higher flow rates with a lower pressure drop, and longer intervals between element changes. Filter elements come standard in: 5, 30 or 56 micron sizes and are easily replaced. Filters are rated for temperatures -60ºF to 660ºF.
Materials:
body, cover, cover gland: 316 series stainless steel
Element: 300 series stainless steel
This design increases the filter area as much as 6 times the area of the disc type filter, and will permit higher flow rates with a lower pressure drop, and longer intervals between element changes. Filter elements come standard in: 5, 30 or 56 micron sizes and are easily replaced. Filters are rated for temperatures -60ºF to 660ºF.
Materials:
body, cover, cover gland: 316 series stainless steel
Element: 300 series stainless steel
Unit of Measure
Pressure Rating |
N/A 15,200 psi |
Connection Type |
N/A 1/4 in. NPT |
Orifice Size |
N/A 0.201 in |
Micron Size |
N/A 30 µm |
Filter Element Areas |
N/A 0.82 in² |
Dimension A |
N/A 3.25 in |
Dimension B |
N/A 2.36 in |
C (Hex) |
N/A 0.88 in |
D (Hex) |
N/A 0.88 in |
Temperature Range |
N/A -60 to 660 ºF |
Material |
N/A Body, Cover, Cover Gland: 316 Series Stainless Steel Element: 300 Series Stainless Steel |
