Request Information
Maximator® Bleed Valves are designed and engineered for use with Maximator® Gauge Valves for high pressure venting before instrument calibration is performed. These valves can be purchased for both the sour gas and sweet service applications. Sour Gas applications where H2S is present, use the "SOG" suffix (22,500 psig).

For sweet service applications, the standard 316 material valve is preferred.
Unit of Measure

Connection Type

 N/A 9HF

Tube Outer Diameter (O.D.)

 N/A 9/16 in

Dimension A

 N/A 3.53 in

Dimension B

 N/A 3.47 in

Dimension C

 N/A 1.15 in

Dimension D

 N/A 2.61 in

Dimension E

 N/A 1.50 in

Dimension F

 N/A 1.44 in

Pressure Range

 N/A 22,500 psi

Service

 N/A H2S

Material

 N/A Annealed 316 Stainless Steel

Features

 N/A
  • Annealed 316 stainless steel construction meets NACE MR0175.
  • Rising stem designs, both solid and 2 piece configuration available.
  • Metal-to-metal seating achieves bubble-tight shut-off.
  • Carbon-reinforced PTFE with metal back-up rings offers reliable stem to body sealing.
  • Stem sleeve and packing gland materials have been selected to achieve the optimum corrosion resistance to withstand offshore environments.
  • Safety weep holes for all pressure connections and packing area.
  • Seven different valve body patterns, with choice of vee or regulating type stem tip.
  • 9/16" high pressure male connection compatible with standard API test and gauge connections.
  • 1/8" NPTF tapped vent port for safe atmosphere plumbing.
  • One piece stem design with positive blow out prevention.
  • Stainless Steel Tee handle for ease of operation.
  • One piece 316L body construction for ease of installation and corrosion resistance in a wide variety of applications.
  • Safety weep hole in packing area.

Note

 N/A When selecting multiple items, the pressure rating would be that of the lowest rated component.

These bleed valves are designed for venting only. The 1/8L NPT outlet port must vent to atmosphere. If a Pressurized outlet is required, Maxpro recommends using the 36V or 22V series needle valves for such piping applications.

Repair Kits

 N/A Consult your MAXPRO® representative for repair kits and valve bodies.

Maximator® Manufacturing

 N/A Maximator® has been designing and manufacturing specialty products to the high pressure market for over thirty years and has a worldwide reputation for quality and reliability.

Maxpro®

 N/A MAXPRO® offers a diverse line of high pressure equipment for all your Oil and Gas applications. Not all options can be applied to the standard valve series, see specific product pages for ordering options.

Terms and Conditions

 N/A All dimensions are for reference only and are subject to change.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.