Exceeds industry standard of 20,000 psi. Maximator® cup-type line filters are used when maximum filtration surface area and a single micron size element is preferred. This design increases the filter area as much as 6 times the area of the disc type filter, and will permit higher flow rates with a lower pressure drop, and longer intervals between element changes. Filter elements come standard in 5, 30, or 56 micron sizes and are easily replaced. Filters are rated for temperatures -60ºF to 660ºF. All line filters come with glands and collars.
Unit of Measure

Pressure Rating at Room Temperature (RT)

N/A 22,500 psi

Orifice Size

N/A 0.106 in

Micron Size

N/A 56 µm

Connection Type

N/A 4MF

Filter Element Areas

N/A 0.82 in²

Dimension A

N/A 2.38 in

Dimension B

N/A 2.87 in

Dimension C (Hex.)

N/A 0.88 in

Temperature Range

N/A 60 to 660 ºF

Material

N/A Body, Cover, Cover Gland: 316 Series Stainless Steel Element: 300 Series Stainless Steel

Note

N/A
  • It is recommended that all fluids entering a high pressure system be thoroughly cleaned.
  • Maximator® filters are designed to remove small amounts of process particles.
  • Pressure differential should not exceed 1000 psi across the filter elements.

Terms and Conditions

N/A
  • All dimensions are for reference only and subject to change.
  • All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

N/A CXF4-65