Request Information
MAXPRO gas booster systems provide a compact, portable source for increasing gas pressures. These air driven booster systems are shipped assembled and fully tested, ready for turn-key installation. As with standard boosters, the gas booster systems require no electrical power, providing safe and economical operation.
Gas booster systems are capable of compressing most gases including nitrogen, argon, helium and hydrogen up to 20,000 psi. Systems featuring special seals and cleaning can pressurize oxygen to 5,000 psi. All MAXPRO systems for use with hazardous gases are modified to ensure vent ports are piped to a common vent connection.
Unit of Measure

Media

 N/A Oxygen Gas

Gas Booster Type

 N/A DLE5-30

System Rating

 N/A 3000 psi

Minimum Suction Pressure

 N/A 40 psi

Dimensions

 N/A 16 x 23 x 28 in

Width

 N/A 16.00 in

Height

 N/A 23.00 in

Length

 N/A 28.00 in

Weight

 N/A 120 lb

Features

 N/A
  • Pressures to 21,750 psi for most gases and 5,000 psi for oxygen
  • Easy to install and operate
  • Compact, lightweight design
  • Single or double acting and two stage models
  • Double air head available in single and two stage boosters
  • No electrical power required
  • Requires no lubrication
  • Boosters are contaminant free
  • Units can be operated in series or parallel
  • Variety of pressure and compression ratios available

Note

 N/A
  1. Various other gas booster models can be used to best fit your specific application.
  2. Schematic shown is the standard system. Other options may be added or removed as required.
  3. The hazardous gas systems have all vent ports plumbed to a common discharge port This port must be plumbed to a safe vent area.
  4. The oxygen systems have all components cleaned for oxygen service.
  5. For higher flow rates and/or multiple stages, more than one booster may be used in the system.