MAXIMATOR® Dual-Disc Line Filters are used to filter process fluids in high pressure systems. This design helps remove the large particles first through a coarse primary disc, which then allows a secondary disc to provide a smaller micron filtration.
These filter elements are designed to withstand pressure surges without cracking, flaking, or rupturing. Filter elements come standard in the following micron sizes: 5/8, 8/30, 30/56 (secondary/primary). Filters are rated for temperatures -60°F to 660°F. All line filters come with glands and collars.
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 

Item #

Orifice

Micron Size

Connection Type

Dimension A

Dimension B

Dimension C

30DF4H-5/8-SOG N/A 0.094 in N/A 5/8 N/A 4HF N/A 2.99 in N/A 4.81 in N/A 1.19 in
30DF4H-8/30-SOG N/A 0.094 in N/A 8/30 N/A 4HF N/A 2.99 in N/A 4.81 in N/A 1.19 in
30DF4H-30/56-SOG N/A 0.094 in N/A 30/56 N/A 4HF N/A 2.99 in N/A 4.81 in N/A 1.19 in
30DF6H-5/8-SOG N/A 0.125 in N/A 5/8 N/A 6HF N/A 2.99 in N/A 5.18 in N/A 1.19 in
30DF6H-8/30-SOG N/A 0.125 in N/A 8/30 N/A 6HF N/A 2.99 in N/A 5.18 in N/A 1.19 in
30DF6H-30/56-SOG N/A 0.125 in N/A 30/56 N/A 6HF N/A 2.99 in N/A 5.18 in N/A 1.19 in
30DF9H-5/8-SOG N/A 0.187 in N/A 5/8 N/A 9HF N/A 3.39 in N/A 5.73 in N/A 1.44 in
30DF9H-8/30-SOG N/A 0.187 in N/A 8/30 N/A 9HF N/A 3.39 in N/A 5.73 in N/A 1.44 in
30DF9H-30/56-SOG N/A 0.187 in N/A 30/56 N/A 9HF N/A 3.39 in N/A 5.73 in N/A 1.44 in
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 
© 2017 MaxPro Technologies Inc, All Rights Reserved Site created by Thomas Web Solutions and powered by Navigator Platform