Intensifier is available separately
When purchased with the hydraulic power supply package
the unit comes completely assembled, ready for operation. 
    • Flow rates to 125 scfm and max supply and outlet pressure to 1,500 psi
    • Single stage, double acting
    • Ideal for low or medium compression ratios and high flow
    • Oil free, non-lubricated gas pistons
    • Maximum hydraulic drive pressure of 2,250 psig
    • Maximum hydraulic flow rate of 8 gpm
    • Pressure ratio 1:0.68
    • Simple design for ease of operation
    • Minimum inlet gas pressure 100 psig
    • Displacement per double stroke of 95.6 inch3
    • Maximum cycles (double stroke) of 30 per minute
    • Stroke Length of 8"
    • 100% duty rated
    • Liquid cooled gas barrels and long stroke length increases the packing life

Many control options are available


• Gas Inlet and Gas Outlet 3/8" NPT

• Coolant Inlet and Outlet ½" FNPT

The intensifier can be purchased as a complete unit
mounted on the hydraulic power pack.
The hydraulic unit comes with the following features:


  • 10 HP totally enclosed fan cooled motor, 460v 3ø
  • Variable displacement piston pump
  • 24 VDC on/off solenoid to control cylinder
  • Filtration and hydraulic oil cooling circuit
  • Hydraulic pressure relief valves to prevent over-pressurization
  • Oil level and temperature sensors

Unit as pictured above is roughly 30" deep,
44¼" wide and 40" tall

Quick Contact:
© 2017 MaxPro Technologies Inc, All Rights Reserved Site created by Thomas Web Solutions and powered by Navigator Platform