Maximator® Cup-Type Line Filters are used when maximum filtration surface area and a single micron size element is prefered. This design increases the filter, and will permit higher flow rates with a lower pressure drop, and longer intervals between element changes.
Filter elements come standard in 5, 30, or 56 micron sizes and are easily replaced. Filters are rated for temperatures -60ºF to 660ºF. All line filters come with glands and collars.
Unit of Measure

Material

N/A Annealed 316 Stainless Steel

Pressure Rating

N/A 30,000 psi

Orifice Size

N/A 0.125 in

Micron Size

N/A 30 µm

Connection Type

N/A 6HF

Filter Element Areas

N/A 0.82 in²

Dimension A

N/A 2.39 in

Dimension B

N/A 4.44 in

Dimension C

N/A 1.44 in

Temperature Range

N/A -60 to 660 ºF

Note

N/A It is recommended that all liquids entering a high pressure system be thoroughly cleaned, Maximator® filters are designed to remove small amounts of process particles. Pressure differential should not exceed 1000 psi across the filter elements.

Terms and Conditions

N/A All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.