Maximator® Cup-Type Line Filters are used when maximum filtration surface area and a single micron size element is prefered. This design increases the filter, and will permit higher flow rates with a lower pressure drop, and longer intervals between element changes.
Filter elements come standard in 5, 30, or 56 micron sizes and are easily replaced. Filters are rated for temperatures -60ºF to 660ºF. All line filters come with glands and collars.
Filter elements come standard in 5, 30, or 56 micron sizes and are easily replaced. Filters are rated for temperatures -60ºF to 660ºF. All line filters come with glands and collars.
Unit of Measure
Material |
N/A Annealed 316 Stainless Steel |
Pressure Rating |
N/A 30,000 psi |
Orifice Size |
N/A 0.094 in |
Micron Size |
N/A 5 µm |
Connection Type |
N/A 4HF |
Filter Element Areas |
N/A 0.82 in² |
Dimension A |
N/A 3.39 in |
Dimension B |
N/A 4.25 in |
Dimension C |
N/A 1.44 in |
Temperature Range |
N/A -60 to 660 ºF |
Note |
N/A It is recommended that all liquids entering a high pressure system be thoroughly cleaned, Maximator® filters are designed to remove small amounts of process particles. Pressure differential should not exceed 1000 psi across the filter elements. |
Terms and Conditions |
N/A All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. |