Exceeds industry standard 20,000 psi. Maximator® dual-disc line filters are used to filter process fluids in high pressure systems. This design helps remove the large particles first through a coarse primary disc, which then allows a secondary disc to provide a smaller micron filtration. These filter elements are designed to withstand pressure surges without cracking, flaking, or rupturing. Filter elements come standard in the following micron sizes: 5/8, 8/30, 30/56 (secondary/primary). Filters are rated for temperatures -60ºF to 660ºF. All line filters come with glands and collars.
Unit of Measure

Pressure Rating

N/A 22,500 psi

Orifice Size

N/A 0.265 in

Micron Size

N/A 5/8 µm

Connection Type

N/A 9MF

Filter Element Areas

N/A 0.25 in²

Dimension A

N/A 2.68 in

Dimension B

N/A 4.96 in

Dimension C (Hex.)

N/A 1.44 in

Material

N/A Body: Cover, Cover Gland: 316 Series Stainless Steel Element: 300 Series Stainless Steel

Temperature Range

N/A -60 to 660 ºF

Terms and Conditions

N/A
  • All dimensions are for reference only and subject to change.
  • All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Note

N/A
  • It is recommended that all fluids entering a high pressure system be thoroughly cleaned.
  • Maximator® filters are designed to remove small amounts of process particles.
  • Pressure differential should not exceed 1000 psi across the filter elements.