Oxygen Gas Booster Systems

Small, lightweight and economical, MAXPRO® oxygen gas booster packages are ideal for aircraft and bottle filling applications. Requires only an air source for power (70 psi minimum) and an oxygen supply bottle that can be used to as low as 100 psi. These booster packages will achieve up to 2,000 psi outlet pressure. Single (DLE30-1) and double acting (DLE30) boosters are available to meet low flow or high flow requirements.
  • All stainless steel components, cleaned for oxygen service
  • Contaminant free operation with complete separation and isolation between the oxygen and air drive sections
  • No electrical power required, only a 70 psi shop air source
  • Automatic shut-off at desired outlet pressure for unattended operation
  • Safety relief devices and pressure gauges included on both gas and air sides
  • Manual vent valve for venting gas pressure prior to disconnecting outlet line
  • Drive air filter and shut-off ball valve to manually stop booster
  • Drive air connection is 1/2" FNPT
  • Oxygen gas inlet and outlet connections are 1/4" FNPT
  • All components are mounted to the booster and tested prior to shipment
  • Compression ratios and the control of heat generated are especially important on pure oxygen systems. Consult MAXPRO® for safety considerations.
MTO2-2-DLE30 for higher required flow rates.

This package is 25"LG x 15"WD x 10"HG and weight approximately 54 lbs.
Unit of Measure

Dimensions

N/A 25 in. LG x 15 in. wd x 10 in. Hg

Length

N/A 25.00 in

Width

N/A 15.00 in

Height

N/A 10.00 in

Weight

N/A 54 lb

Outlet Pressure

N/A 1,800 to 2,000 psi

Features

N/A
  • All stainless steel components, cleaned for oxygen service
  • Contaminant free operation with complete separation and isolation between the oxygen and air drive sections
  • No electrical power required, only a 70 psi shop air source
  • Automatic shut-off at desired outlet pressure for unattended operation
  • Safety relief devices and pressure gauges included on both gas and air sides
  • Manual vent valve for venting gas pressure prior to disconnecting outlet line
  • Drive air filter and shut-off ball valve to manually stop booster
  • Drive air connection is 1/2" FNPT
  • Oxygen gas inlet and outlet connections are 1/4" FNPT
  • All components are mounted to the booster and tested prior to shipment