• Pipe Fittings Pressure to 15,200 psi

    Exceeds industry standard of 15,000 psi. Maximator® Pipe fittings are designed for liquid and gas applications. The P Series Fittings are available from 1/4" to 1" NPT to 15,200 psi. These are high pressure NPT fittings for pressures up to 15,200 psi.

    NPT threads must be sealed using a high quality PTFE tape and/or paste product. Sealing performance may vary based on many factors such as pressure, temperature, media, thread quality, thread material, proper thread engagement and proper use of thread sealant.

    Maximator® Recommends to limit the number of times an NPT fitting is assembled and disassembled because thread deformation during assembly will result in deteriorating seal quality over time. When using only PTFE tape, using thread lubrication to prevent galling of mating parts is recommended.

  • Medium Pressure Fittings

    Exceeds industry standard of 20,000 psi. MAXPRO® offers a complete line of Maximator® medium pressure fittings, tubing, check valves, line filters, anti-vibration fittings and safety head assemblies.

    Maximator® medium pressure fittings are designed with the large orifice for use with the 21V series medium pressure valves and medium pressure tubing. All medium pressure fittings have coned and threaded type connections. Mounting holes are standard on all elbows, tees, and crosses.

    Connection Components
    All medium pressure fittings are supplied with glands and collars. Refer to the adjacent chart for ordering any of the connection components individually. When using the plug, the collar is not needed.

  • Anti-Vibration Collet Gland Assemblies

    Exceeds industry standard of 20,000 psi. MAXPRO® offers a complete line of Maximator® medium pressure fittings, tubing, check valves, line filters, anti-vibration fittings and safety head assemblies.

  • Coned & Threaded Nipples

    Exceeds industry standards of 15,000 and 20,000. MAXPRO® offers a line of coned and threaded medium pressure tube nipples in a variety of lengths for all standard tube sizes.

    The coned and threaded medium pressure tube nipples are available in 316 stainless steel. Special length coned and threaded nipples are available upon request.

  • Dual-Disc Line Filters

    Exceeds industry standard of 20,000 psi. MAXPRO® offers a complete line of Maximator® medium pressure fittings, tubing, check valves, line filters, anti-vibration fittings and safety head assemblies.

  • High/Medium Pressure Safety Head Assemblies

    Exceeds industry standards of 20,000 psi. Maximator® safety head assemblies are used to provide over-pressure protection to high pressure systems. These safety head assemblies are to be used with the appropriate 1/4" angular rupture disc.

  • 1/4" Angular Rupture Discs

    1/4" angular rupture discs are designed to be used with Maximator® safety head assemblies. Minimum rupture disc pressure ratings should be at least 110% of system operating pressure. The standard material is Inconel. The pressure ranges indicated in the table below are at room temperature (72ºF). Other materials and pressure ranges are available upon request.

  • Pressure Fittings

    Exceeds industry standard of 40,000 psi and 60,000 psi
    MAXPRO offers a complete line of Maximator® high pressure fittings, tubing, check valves, line filters, anti-vibration fittings and safety head assemblies. All high pressure valves and fittings use the high pressure style connection. Maximator® high pressure fittings are designed to be used with the 43V and 65V series high pressure valves and high pressure tubing. All HiP fittings have coned and threaded type connections. Mounting holes are standard on all elbows, tees, and crosses.

  • 1/4 Inch (in) Tube Outside Diameter (O.D.) Anti-Vibration Collet Gland Assembly

    Maximator® anti-vibration collet gland assemblies are for use in applications where there could be extreme external mechanical vibrations or shock in tubing lines. These collet gland assemblies are interchangeable with the standard high pressure coned and threaded tube connections. All anti-vibe assemblies come with baked on MOLY-coating.

  • Coned and Threaded Nipple Fittings

    MAXPRO® offers a line of coned and threaded high pressure tube nipples in a variety of lengths for all standard tube sizes.

    The coned and threaded high pressure tube nipples are available in 316 stainless steel.

    Special length coned and threaded nipples are available upon request. Consult MAXPRO® for availability and price.

  • Dual Disc Line Filter

    Exceeds industry standard of 60,000 psi. Maximator® line filters are either Dual-Disc Line Filters and Cup-Type Line Filters.

  • High/Medium Pressure Safety Head Assemblies

    Exceeds industry standard of 60,000 psi. Maximator® safety head assemblies are used to provide over-pressure protection to high pressure systems. These safety head assemblies are to be used with the appropriate 1/4" angular rupture disc listed on the Rupture Disk web page.

  • Ultra-High Pressure Fittings 101,000 psi

    MAXIMATOR® Ultra-High pressure fittings are designed to be used with the Ultra-High pressure tubing and coned and threaded nipples. All Ultra-High pressure fittings have coned and threaded type connections and are supplied with glands and collars. Mounting holes are standard on all elbows, tees, and crosses.

  • Ultra-High Pressure Special Collar

    To adapt 1/4" UHP male nipples to 5/16" UHP female connections.

  • Ultra-High Pressure Fittings 152,000 psi

    MAXIMATOR® Ultra-High pressure fittings are designed to be used with the 101V series Ultra-High pressure valves and Ultra-High pressure tubing. All Ultra-High pressure fittings have coned and threaded type connections and are supplied with glands and collars. Mounting holes are standard on all elbows, tees, and crosses.