• Hydraulic Driven Gas Booster to 1,500 psi

    Intensifier is available separately
    When purchased with the hydraulic power supply package
    the unit comes completely assembled, ready for operation. 
      • Flow rates to 125 scfm and max supply and outlet pressure to 1,500 psi
      • Single stage, double acting
      • Ideal for low or medium compression ratios and high flow
      • Oil free, non-lubricated gas pistons
      • Maximum hydraulic drive pressure of 2,250 psig
      • Maximum hydraulic flow rate of 8 gpm
      • Pressure ratio 1:0.68
      • Simple design for ease of operation
      • Minimum inlet gas pressure 100 psig
      • Displacement per double stroke of 95.6 inch3
      • Maximum cycles (double stroke) of 30 per minute
      • Stroke Length of 8"
      • 100% duty rated
      • Liquid cooled gas barrels and long stroke length increases the packing life

    Many control options are available


    • Gas Inlet and Gas Outlet 3/8" NPT

    • Coolant Inlet and Outlet ½" FNPT

    The intensifier can be purchased as a complete unit
    mounted on the hydraulic power pack.
    The hydraulic unit comes with the following features:


    • 10 HP totally enclosed fan cooled motor, 460v 3ø
    • Variable displacement piston pump
    • 24 VDC on/off solenoid to control cylinder
    • Filtration and hydraulic oil cooling circuit
    • Hydraulic pressure relief valves to prevent over-pressurization
    • Oil level and temperature sensors

    Unit as pictured above is roughly 30" deep,
    44¼" wide and 40" tall

  • Hydraulic Driven Gas Booster to 15,000 PSI

      • Maximum discharge pressure: 15,000 psi
      • 12.3 compression ratio
      • Minimum operating inlet gas pressure: 1,000 psig
      • Estimated Flow rates: 75 - 165 SCFM depending on gas inlet pressure
      • Ambient operating temperature: 60-90 °F


    Single stage, double acting Hydralic Driven Gas Booster
    Motor: 40 HP, 480V, 3 phase, 60hz, TEFC
    Oil free non-lubricated gas pistons and cylinders
    PLC/HMI color touch screen
    Safety shut for coolant flow, low hydraulic fluid and hydraulic oil temperature
    0-20,000 psig pressure transducer
    Solenoid operated coolant flow valve
    Option for remote controlled operation
    Liquid cooled gas barrels
    Fully enclosed
    Emergency stop button
    100% duty rated

    The unit is rated for 15,000 psi maximum and will have the following connections:

    • Gas inlet: 9/16" OD medium pressure coned and threaded connection

    • Gas outlet from system: 3/8" OD medium pressure coned and threaded connection

    • Electrical requirements: 480 3 phase

    • Coolant inlet:1/2" FNPT

    • Coolant outlet:1/2" FNPT

Quick Contact:
© 2017 MaxPro Technologies Inc, All Rights Reserved Site created by Thomas Web Solutions and powered by Navigator Platform